Suppliers with verified business licenses
Spray Booth Model:PC-AS300 | |||
Outside size (mm) | L7000 x W5360 x H3430 | Inside size (mm) | L6900 x W4000 x H2650 |
Main door size (mm) | W3000 x H2600 | Service door size (mm) | W800 x H2000 |
Cabin system | Wall board | Fully insulated coated double walls of galvanized steel sheet (0.426mm), with flame retardant fillings made of EPS. Wall thickness: 50mm ( composite construction) | |
Roof panel | Galvanized steel sheet (0.8mm) | ||
Main door | 1:1 set of 3 fold door, size W3000 x H2600 (mm),metal framed door with double face made of 0.8mm colored steel plates, 2:with square shaped view safety glass window | ||
Service door | 1 set, size W800 x H2000 (mm), with square shaped observation safety glass window | ||
Basement | Solid steel structure platform, galvanized frame structure asssembly, height is 300mm, 2 lines of grids and 3 lines of embossed plates | ||
Ramp | 3 pcs of partial ramps, each pc is W600 x L2000 (mm), embossed plate structure | ||
Lighting system | Ceiling light | 8 groups x 4pcs =32pcs x 16w LED tube | |
Side light | 8 groups x 2pcs =16pcs x 16w LED tube | ||
Heating system | Material | SUS304 high efficiency heat-resistant stainless steel, argon arc welding | |
Capacity | 200KW(200.000Kcal/h) | ||
Burner | Italy RIELLO diesel burner G20 | ||
Heating time | 5~7 minutes ( from 20°C to 60°C ) | ||
Chimney | 4m straight with 1 x 90°C elbow, made by galvanized steel plate | ||
Ventilation system | Inlet fan | YDW Centrifugal fan, air capacity 24000m3/h, power 2 x 4kw motor | |
Air inlet duct | \ | ||
Paint to bake | 20N electric actuator, damper adjustment to exchange from painting to baking | ||
Exhaust fan | YDW Centrifugal fan, air capacity 15000m3/h, power 1 x 5.5kw motor | ||
Air exhaust duct | 4m from the cabin equipped with 1 x 90°C elbow | ||
Filtration system | Primary filter | Capture granules larger than 10 μm | |
Ceiling filter | Capture granules bigger than 5μm | ||
Floor filter | Floor paint stop | ||
Exhaust filter | Fiber glass filter & Active carbon particle | ||
Control system | Operation mode | Switch button | |
Function | Paint, rising temperature paint, bake, temperature setting, time setting, lighting, hour meter, fan failure indicator, light, burner failure indicator, etc. | ||
Protective device | Emergency stop switch, breakdown alarm, thermal protector | ||
Start | Direct | ||
Main Components | CHINT, Schneider, CCC & CE certificated | ||
Total Power | 15KW |
Suppliers with verified business licenses